NEWS

Atomized Ferrosilicon Powder: Production, Dense Media Separation & Industrial Uses

Atomized Ferrosilicon Powder is a finely divided spherical alloy produced by the rapid cooling and atomization of molten ferrosilicon. Primarily composed of iron (Fe) and silicon (Si)—with silicon concentrations typically tailored between 15% and 90% (most commonly FeSi 15% and FeSi 45%)—this specialized material combines high density, corrosion resistance, and excellent powder flowability.

These attributes make atomized ferrosilicon an essential medium in Dense Media Separation (DMS) for mining, steel deoxidation, welding wire flux coatings, and organosilicon chemical synthesis.

Water Atomization Manufacturing Process

The atomization process allows precise control over particle morphology, apparent density, and size distribution:

1.1. Induction Furnace Melting:Melting & Composition Adjustment。

Standard 75% ferrosilicon (FeSi75) is re-melted with premium steel scrap in an induction furnace to adjust the silicon content to exact target grades (such as FeSi 15% or FeSi 45%) [00:04].

2.2. High-Pressure Water Jetting:Disintegration & Spherical Granulation。

The stream of molten ferrosilicon is disintegrated into fine liquid droplets using a high-pressure water jetting system, causing rapid quenching into smooth, spherical particles [00:12].

3.3. Sieving & Custom Sizing:Drying, Classification & Packaging。

The atomized slurry is dewatered, dried, magnetically separated, and sieved into specific mesh fractions according to customer requirements [00:20].

 

Core Industrial Applications

1. Dense Media Separation (DMS) in Mining

Dense Media Separation (DMS), or Heavy Medium Separation (HMS), utilizes a high-density liquid suspension to segregate valuable minerals from waste rock based on specific gravity differences:

  • High-Density Slurry Formation: Suspended in water, atomized ferrosilicon forms a stable, low-viscosity heavy medium.

  • Ore Recovery: Light gangue waste floats to the surface while dense minerals—such as diamonds, iron ore, coal, and heavy mineral sands—sink for recovery.

  • High Media Recovery: Spherical particles offer superior resistance to corrosion and mechanical degradation, while magnetic properties enable over 99% media recovery via drum magnetic separators.

2. Steelmaking & Foundry Metallurgy

  • Steel Deoxidation: Removes dissolved oxygen from liquid steel during ladle refining, preventing gas porosity and improving steel cleanliness.

  • Cast Iron Inoculation: Acts as an effective nucleating agent in gray and ductile iron casting, promoting graphite flake/nodule formation to enhance machinability and mechanical strength.

  • Silicon Steel (Electrical Steel): Supplies uniform silicon additions required for transformer cores and electric vehicle (EV) drive motor laminations, reducing magnetic core loss.

3. Welding Consumables

Used in the production of stick welding electrode coatings and flux-cored arc welding (FCAW) wires:

  • Acts as a deoxidizer and silicon alloying agent in the weld pool.

  • Stabilizes the electric arc, reduces spatter, and improves weld metal hardness and corrosion resistance.

4. Chemical Processing & Silicone Synthesis

Serves as a silicon donor in organosilicon chemistry for synthesizing silicones, silanes, and intermediate derivatives utilized in automotive sealants, construction coatings, and electronics packaging.

5. Refractories, Ceramics & Protective Coatings

  • Refractory Formulations: Added to high-temperature furnace linings and kilns to improve thermal shock resistance, abrasion resistance, and chemical corrosion resistance.

  • Thermal Spraying: Applied as a surface treatment coating to impart wear and thermal barrier properties to metal components.

Technical Specifications Breakdown

Atomized FeSi 15% Grade

  • Silicon (Si) Content: 14.0% – 16.0%

  • Iron (Fe) Content: Balance

  • Particle Shape: Spherical / Sub-spherical

  • Apparent Density: ~3.4 – 3.8 g/cm³

  • True Density: ~6.8 – 7.1 g/cm³

  • Common Mesh Sizes: -270 mesh, -325 mesh, 150/270 mesh

Atomized FeSi 45% Grade

  • Silicon (Si) Content: 43.0% – 47.0%

  • Iron (Fe) Content: Balance

  • Particle Shape: Spherical / Sub-spherical

  • Apparent Density: ~2.8 – 3.2 g/cm³

  • True Density: ~5.1 – 5.4 g/cm³

  • Common Mesh Sizes: Custom mesh sizes available upon request

Video Showcase: Atomized Ferrosilicon Production

Observe the dark metallic luster, fluid motion, and powder characteristics of atomized ferrosilicon:

Global Supplier: LSFerroalloy

LSFerroalloy is a leading producer and exporter of atomized ferrosilicon powders for global mining, welding, and metallurgical industries.

  • Strict Particle Sizing: Air classification and precise screening eliminate ultrafine dust, ensuring consistent slurry viscosity in DMS plants.

  • Custom Chemistry: Tailored silicon content and controlled impurity levels (Al, C, S, P).

  • Export Packaging: 25 kg moisture-proof bags, 1000 kg steel-lined jumbo bags, or sealed heavy-duty drums.

Contact Sales & Technical Support:

  • Website: www.lsalloy.com

  • Email: info@lsalloy.com

  • Phone / WhatsApp: +86 15837207537

INQUIRY NOW

If you have any questions, please leave your contact information and we will reply to you as soon as possible.

Send Inquiry Send Email Whatsapp